Our Success Stories
Mobilgrease XHP 322 MINE saves the Crusher Plant $12,000 by increasing relubrication intervals and efficiency.
Crusher Plant, Türkiye With the use of Mobilgrease Status A competitor's product with a lithium thickener of NLGI class 2 was used. Especially in facilities where vibration, dust and temperature were high, grease could not hold on to the bearings for long, causing the need for frequent greasing. However, it caused bearing failures. Suggestion Mapa […]
Oil change intervals are extended by preventing production losses with Mobil DTE 10 Excel™ 46
Aluminum Extrusion, Aluminum, Kayseri / Turkey Status The company was using a rival brand of hydraulic oil in the aluminum extrusion machine on its production line. Since the viscosity index and filterability performance of the existing oil were low, there were major problems in pressure losses and keeping the system clean. Suggestion The aluminum extrusion […]
98,750 TL Savings Achieved Annually from Oil Cost
With the use of Mobil Delvac 1 5w-40 Engine Oil in the 14 Forklift Vehicles in the Company, Oil Change Times have been Increased to 1,200 Hours, and the Annual Spare Parts and Oil Cost is 98,750 TL. Savings Achieved. 15W-40 heavy diesel engine oil is currently used in 14 Komatsu FD-40 and TCM 30-40 […]
The Savings Era of Oil Change Has Begun with the Use of Mobil Delvac 1!
By using Mobil Delvac 1 5w-40 engine oil in the company's Hidromek HMK-370 crawler excavator, oil change times have been increased to 1,000 hours, and the annual cost of spare parts and oil is 10,500 TL. Savings have been achieved. 15W-40 heavy diesel engine oil is currently used in the Hidromek HMK-370 crawler excavator in […]
Mobil 1 ESP FORMULA 5W-30 Extends Engine Life!
2011 Model RENAULT FLUENCE 1.5 DCI vehicle with 45,000 KM was used with factory filling oil (5w-30) and has been used with Mobil 1 ESP FORMULA 5W-30 Diagnostic Synthetic engine oil since the first oil change. 2011 Model RENAULT FLUENCE 1.5 DCI vehicle with 45,000 KM. Using Mobil 1 ESP FORMULA 5W-30 full Synthetic engine […]
We Extended Oil Change to 10,000 Hours with Mobil Rarus SHC 1025 and Saved Money!
Oil change in ATLAS COPCO GA110-FF screw type air compressor has been extended to 10,000 hours, thus saving on oil and filter costs. Mineral oil with ISO VG 46 viscosity was used in the ATLAS COPCO GA110-FF brand screw type air compressor, which has an important place in the company's production line. Due to […]
Maintenance Costs Reduced with Mobil Delvac 1 LE 5W-30!
With MOBIL DELVAC 1 LE 5W-30 used in the CAT 950H 2007 model wheel loader, engine oil change time was increased to 1019 hours, and 365₺ was saved in spare parts and oil costs. In this way, a total of 98,640 TL savings was achieved for a total of 18 construction machines in the enterprise, […]
Spare Part Costs Reduced with Mobilith SHC 460!
With Mobilith SHC 460 used in Bombi brand drying oven fan bearings, significant savings were achieved in spare parts costs during its 1-year use. A rival company's high temperature grease with a synthetic base oil structure was used in the drying oven fan bearings, which have an important place in the company's production line. 4 […]
130% savings in oil consumption is now possible with Mobil Pegasus 705.
As a result of increasing the oil change intervals from 2,500 hours to 5,800 hours in the Mobil Pegasus 705 and MWM 1.6 MW natural gas engine, approximately 130% savings in oil consumption were achieved. In the analyzes made with a rival product with SAE 40 viscosity used in 1 MWM 1.6 MW natural gas […]
Annual savings of 275,000 TL are possible with Mobil Delvac 1!
SAE 10W-40 and SAE 5W-30 heavy duty engine oil was used in MAN and FORD brand dump earthmoving trucks in our customer company, and SAE 15w-40 engine oil was used in Volvo, Cat and Bomag construction machines. While dump trucks' oil and filter changes took 400 to 700 hours, depending on the model year, oil […]
Malfunctions are over, production has not stopped!
In the drying oven fan bearings, which have an important place in our customer company's production line, high temperature grease with a synthetic base oil structure from a rival company was used. There were 4 bearings numbered SKF 22217-C3 in the fan. In the joint work carried out with our customer, taking into account the […]
Bearing failures are over, using 75% less grease!
A different brand of mineral-based lithium soap NLGI number 2 grease was used in the bearings in the company's Sarsak sifter machines. Due to the intense operation of the equipment, high temperature and vibration conditions, the grease used could not hold on to the bearings and leaked, causing bearing failures on average twice a year. […]
